REMOVABLE ALUMINIUM
UTE CANOPIES
- Super-Strong & Lightweight Lift‑Off (Removable) Canopy Options
- Proven Standard Configurations or Customised Fitouts Available
- Built to Meet Your Needs, Guaranteeing 100% Satisfaction 100% of the Time
- 100% Australian Owned & Family Run Company
- Hand Fabricated in Orange NSW, Ready to Go Anywhere in Australia
Standard Canopy Configurations
We have a range of standard configurations you can choose from.
Click the button below to view our configurations!
CANERO Aluminium Ute Canopies are Built from the Ground Up to Work Smarter and Last Longer
Our Aluminium Ute Canopies combine unique design features with super strong and lightweight aluminium construction — guaranteed to serve you for many years to come. Whether you’re trekking to the Red Centre on the trip of a lifetime or you’re a tradie looking for the perfect ute canopy setup to keep your tools safe and organised, we’ve got you covered!
- CANERO Canopies can be fabricreated as Lift Off (Removable) Canopies designed to compliment a Canero Ute Tray, or as a Full Time Canopy/Service Body designed to maximise space and minimise weight
- CANERO Ute Canopies are engineered with flat floors all the way to the edge of the canopy — there are no ugly false floors or packers needed for your draws and fridge slides. The dust seal is also located away from the floor, protecting it from being harmed from heavy items being pulled over it and meaning minimal maintenance
- All our corner bracing columns and internal bracing are connected and can be used to conceal wiring and neatly mount switch boards etc. This helps to protect your wiring and keep your ute looking neat and tidy
Impressive Range of Ute Canopy Features Available
Gas-Strut Assisted Doors
Gull Wing Doors
385 Series Tailights
131 Series Truck Lights
One Piece Flared Mudguard
Window Protection Mesh
Integrated Fuel Filler Cap
Lasercut Tie-Down Slots
Internal flush-mount tie downs
Whale Tail Locks
External Canopy Worklights
Spare Wheel Carrier
4kg gas bottle holder
Fold Down Ladder
Jerry Can Holder
Canopy Roof Racks
LED Internal Strip Lights
Canopy Fridge Barrier
130L Upright Bushmans Fridge
85L Upright Bushmans Fridge
40L Evacool Drawer Fridge
Canopy Drawer and Bench
ARB Twin Compressor & Air Tank
Under Body Water Tank
Trundle Tray Lift Up Lid
Rear Trundle Drawer
12V Fitouts
Gas-Strut Assisted Doors
Gull Wing Doors
Whale Tail Locks
External Canopy Worklights
Spare Wheel Carrier
Canopy Drawer and Bench
40L Evacool Drawer Fridge
85L Upright Bushmans Fridge
130L Upright Bushmans Fridge
Canopy Fridge Barrier
12V Fitouts
LED Internal Strip Lights
Canopy Roof Racks
Jerry Can Holder
Fold Down Ladder
4kg gas bottle holder
Check Out Our Gallery
Dimensions
Standard Single Cab Utes
Hilux, Ranger, DMAX, BT50 – all 1865mm Wide
- Partial Canopy: 1000mm L
- Half Canopy: 1450mm L
- 3/4 Canopy: 1825mm L
- Full-Length: 2450mm L
Standard Dual Cab Utes
Hilux, Ranger, DMAX, BT50 – all 1865mm Wide
- Half Canopy: 1000mm L
- 3/4 Canopy: 1450mm L
- Full-Length: 1825mm L
79 Series LandCruisers
All 1800mm Wide
Single Cab
- Partial Canopy: 1000mm L
- Half Canopy: 1450mm L
- 3/4 Canopy: 1825mm L
- Full-Length: 2450mm L
Dual Cab
- Half Canopy: 1000mm L
- 3/4 Canopy: 1450mm L
- Full-Length: 1825mm L
American Trucks & LC 200/300
Silverado, RAM, F-Truck & LC 200/300 – all 2000mm Wide
- Small Partial Canopy: 800mm L
- Partial Canopy: 1000mm L
- Half Canopy: 1450mm L
- 3/4 Canopy: 1825mm L
- Full Canopy: 1970mm L
12V Packages
The Weekender 12V System
Our entry-level 12V package.
• 1 x Redarc 1250 50A DCDC Vehicle/Solar Charger
• 1 x 100A/Hr Lithium Battery
• 2 x Tri-Colour Dimmable LED Internal Strip Lights
• 2 x Power Output Anderson Plug’s (1 x for Fridge)
• 2 x Solar Input Anderson Plug
• 1 x Cigarette Socket
• 2 x USB Outlet’s
• System wired to Vehicle Crank Battery
• All Labour to Mount Accessories, Wire and Test Electrical System
The Explorer 12V System
Our mid-tier 12V package.
• 1 x Victron Battery Monitor BMV-712
• 1 x Victron DCDC Orion-Tr 12/12-30A (Battery Charger)
• 1 x Victron MPPT SmartSolar 100/20 (Solar Charger)
• 1 x Victron Phoenix 1200W Inverter
• 1 x 100A/Hr Lithium Battery
• Tri-Colour Dimmable LED Internal Strip Lights
• 2 x Power Output Anderson Plug’s (1 x for Fridge)
• 1 x Solar Input Anderson Plug (Located Externally at Front Passenger Side)
• 1 x Cigarette Socket
• 2 x USB Outlet’s
• System wired to Vehicle Crank Battery
• All Labour to Mount Accessories, Wire and Test Electrical System
The Nomad 12V System
Our premium mid-tier 12V package.
• 1 x Victron Inverter/Charger MultiPlus 12/2000/80-32 (Incorporates 2000W Inverter and 80A AC Charger)
• 1 x Victron DCDC Orion-Tr 12/12-30A
• 1 x Victron MPPT SmartSolar 100/50
• 1 x Victron Battery Monitor BMV-712
• 1 x Victron Digital Multi Control 200/200A
• 2 x RCBO Safety Switch
• 1 x Double GPO for Inverter access
• 3 x Anderson Plug’s (1 for Fridge)
• 1 x Solar Input Anderson Plug (Located Externally at Front Passenger Side)
• 1 x Cigarette Socket
• 1 x Twin USB Outlets
• 1 x Bluesea SafetyHub 150
• 1 x 200A/Hr Slimine Lithium Battery
• 4 x Tri-Colour Dimmable LED Internal Strip Lights
• System wired to Vehicle Crank Battery
• All Labour to Mount Accessories, Wire and Test Electrical System
The Aussie Expedition 12V System
Our most comprehensive 12V package.
• 1 x Victron Inverter/Charger MultiPlus-II 12/3000/120-32 (Incorporates 3000W Inverter and 120A AC Charger). AC Charging Port on rear wall for easy access. External GPO on rear wall for external Inverter Usage
• 1 x Victron DCDC Orion-Tr 12/12-30A
• 1 x Victron MPPT SmartSolar 100/50
• 1 x Victron Monitor Smartshunt
• 1 x Victron Monitor Cerbo GX
• 1 x Victron TouchScreen Battery Monitor
• 2 x RCBO Safety Switch
• 1 x Internal Double GPO
• 6 x Anderson Plug’s
• 1 x Cigarette Socket
• 1 x Twin USB
• 1 x Bluesea SafetyHub 150
• 2 x Internal Cooling Fans
• 1 x 300A/Hr Lithium Battery
• 4 x Tri-Colour Dimmable LED Internal Strip Lights
• System wired to Vehicle Crank Battery
• All Labour to Mount Accessories, Wire and Test Electrical System
For more information, including images, click the button below: